vivarox/arduino
3
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Added led indicators

Browse Source
This commit is contained in:
Warky 2024-09-23 19:11:37 +02:00
parent ed421346a9
commit 42554a57da
1 changed files with 25 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
firmware/modbus-sd/modbus-sd-pm8000/modbus-sd-pm8000.ino
View File

@ -17,6 +17,8 @@
#define TX_PIN 7 // SoftwareSerial TX pin
#define SLAVE_ID 101
#define SERIAL_BAUDRATE 9600
#define LED_A_PID 3
#define LED_B_PID 5
// Try to select the best SD card configuration.
#define SPI_CLOCK SD_SCK_MHZ(50)
@ -38,8 +40,22 @@ ModbusMaster node;
unsigned long lastRefreshTime = 0;
bool headerWritten = false;
void flicker(uint8_t pin ,uint8_t times , uint16_t speed ) {
for (int i = 0; i < times; i++) {
digitalWrite(pin, HIGH);
delay(speed);
digitalWrite(pin, LOW);
delay(speed);
}
}
void setup()
{
pinMode(LED_A_PID, OUTPUT);
pinMode(LED_B_PID, OUTPUT);
digitalWrite(LED_A_PID, LOW);
digitalWrite(LED_B_PID, HIGH);
Serial.begin(SERIAL_BAUDRATE); // For debugging
Serial.println(F("Startup \n"));
@ -47,6 +63,7 @@ void setup()
if (!rtc.begin())
{
Serial.println(F("Couldn't find RTC\n"));
flicker(LED_B_PID,4,500); //4 times on LED b is RTC Error
}
if (rtc.lostPower())
@ -54,6 +71,7 @@ void setup()
Serial.println(F("RTC lost power, let's set the time!\n"));
// Comment out the following line once the time is set to avoid resetting on every start
rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));
flicker(LED_B_PID,4,100); //4 times fast on LED b is RTC reset
}
Serial.print(F("Time: "));
@ -73,6 +91,7 @@ void setup()
if (!sd.begin(SD_CONFIG))
{
sd.initErrorHalt(&Serial);
flicker(LED_B_PID,2,500); //2 Times slow, SD Card initilize error
return;
}
Serial.println(F("SD card initialized.\n"));
@ -86,18 +105,21 @@ void setup()
node.begin(SLAVE_ID, modbusSerial);
node.preTransmission(preTransmission);
node.postTransmission(postTransmission);
flicker(LED_A_PID,2,100);
}
void preTransmission()
{
// Serial.println(F("Transmitting Start"));
digitalWrite(DE_RE_PIN, HIGH); // Enable RS485 transmit
digitalWrite(LED_A_PID, HIGH);
}
void postTransmission()
{
digitalWrite(DE_RE_PIN, LOW); // Disable RS485 transmit
digitalWrite(LED_A_PID, LOW);
// Serial.println(F("Transmitting End"));
}
@ -160,6 +182,7 @@ void loop()
Serial.print("\n");
if (!dataFile.open(filename.c_str(), FILE_WRITE))
{
flicker(LED_B_PID,6,100); //Six quick flickers. SD Card error
Serial.println(F("Failed to Open Card "));
}
if (!headerWritten)
@ -173,6 +196,7 @@ void loop()
dataFile.print(",");
}
headerWritten = true;
flicker(LED_A_PID,50,10); //10 flickers, written header
}
primeFileDate();
Serial.print("\n");
@ -242,7 +266,7 @@ void loop()
Serial.print(F("\n\n"));
delay(100);
flicker(LED_A_PID,4,10); //Cycle written 4 quick flickers
}
// // Check if the read was successful